Specifications:

• 13mm pre-finished compact laminate panels.
• Height adjustable stainless steel pedestals.
• In-line doors, flush with rebated fascias.
• Aluminium hinges with nylon bushes and s/s pin, finished in silver anodising (Cambrian 75mm face fixed).
• Die-cast Indicator bolt, finished in brushed silver satin (DV EXCELL 12SCP).
• Die-cast coat hook/door-stop, finished in chrome plate (DC 12841 CP).

Features:

• Water resistant panels provide extended life for both toilets and shower partitions.
• Height adjustable stainless steel pedestals allow for a 100mm adjustment range.
• In-line doors, flush with rebated fascias, create a private and aesthetically pleasing design.
• Robust clean design without traditional clashing strips.

Benefits:

• Extended product life.
• Lower maintenance cost.
• Panels will not lose their integrity, even after wilful damage.
• Ten year guarantee on panel integrity and two year guarantee on hardware.

5214R RESCO COMPACT LAMINATE TOILET & SHOWER PARTITIONS

1. GENERAL

This section relates to the supply and installation of RESCO compact laminate systems, using proprietary, prefabricated toilet partitions and screens.

Documents

1.1 DOCUMENTS REFERRED TO

Documents referred to in this section are:

IS EN 438-4 High-pressure decorative laminates (hpl) - sheets based on thermosetting resins (usually called laminates) - part 4: Classification and specifications for compact laminates of thickness 2 mm and greater

Documents listed above and cited in the clauses that follow are part of this specification. However, this specification takes precedence in the event of it being at variance with the cited document.

1.2 MANUFACTURER'S DOCUMENTS

Manufacturer's and supplier's documents relating to work in this section are:

RESCO product brochures.

Copies of the above literature are available from RESCO NZ Ltd.

Web: www.resco.co.nz

Email: sales@resco.co.nz

Telephone: 07 850 1025

Facsimile: 07 850 1026

Requirements

1.3 NO SUBSTITUTIONS

Substitutions are not permitted to any specified RESCO brand products, components or accessories.

1.4 QUALIFICATIONS

Installers to be experienced, competent and familiar with the materials and techniques specified. Installation to RESCO shop drawings and RESCO Installation Manual current at the time of installation.

1.5 SHOP DRAWINGS

Provide RESCO shop drawings and RESCO Installation Manual for the project. Refer to the general section for timing and review requirements.

1.6 SAMPLES

Submit on request samples of RESCO panels and components for approval of colour and finishes.

Warranties

1.7 WARRANTY - MATERIALS

Provide RESCO NZ Ltd warranty.

10 years: Compact laminate panel integrity

2 years: Hardware

• Provide this warranty on the RESCO NZ Ltd standard form.
• Commence the warranties from the date of completion.

Refer to the general section WARRANTIES for additional requirements.

2. PRODUCTS

Materials - RESCO Series 5000 toilet/shower partitions

2.1 PARTITION PANELS

13 mm compact laminate panels made from thermo-setting resins to IS EN 438-4. Refer to SELECTIONS, colour and length options.

2.2 ALUMINIUM TRIM - HEAD RAIL

Powder coated oval 40 mm x 20 mm extruded aluminium 6060 alloy X-884 headrail. Refer to SELECTIONS for colour option.

2.3 ALUMINIUM TRIM - WALL CHANNELS

Powder coated continuous full height extruded aluminium 6060 alloy A-866 wall channels. Refer to SELECTIONS for finish and colour option.

2.4 FASCIAS

13 mm compact laminate fascias with rebated door stops to allow doors to be fitted flush with adjacent fascias.

2.5 DOORS

13 mm compact laminate in-line doors with rebated door stops to allow doors to be fitted flush with adjacent fascias.

2.6 HARDWARE PER DOOR

3 silver anodised aluminium 6060 alloy fixed pin hinges, 1 silver satin indicator bolt and keeper, 1 chrome brushed doorstop/door hook.

2.7 PEDESTALS

Polished 304 alloy stainless steel height adjustable pedestals with top-end fixing integrated in the system and bottom-end flange-fixed to floor. Pedestals allow for a 100 mm adjustment range.

3. EXECUTION

Conditions

3.1 HANDLE AND STORE

Handle and store all components, panels and accessories to avoid damage. Keep dry in transit. Store clear of and on a level floor and cover for protection.

3.2 SUBSTRATES AND PLUMBING FITTINGS CHECK

Before commencing installation of the RESCO system ensure all substrates are plumb, level and in true alignment, all flooring surfaces are ready and all plumbing fittings are properly positioned. Ensure adequate provisions are made for fixing to relevant walls.

Ensure that the back wall is sufficiently solid to support the suspended Multicube® system.

3.3 PROTECT

Protect adjoining areas, surfaces and finish from damage.

Application

3.4 INSTALL

Carry out the installation to the requirements of RESCO NZ Ltd, relevant shop-drawings and the latest version of RESCO Installation Manual for the project.

Completion

3.5 REPLACE

Replace any damaged or marked elements.

3.6 LEAVE

Leave work with parts fully and freely working and to the standard required by RESCO NZ Ltd.

3.7 REMOVE

Remove debris, unused materials and elements from the site.

4. SELECTIONS

4.1 TOILET/ CUBICLE PARTITIONS

Brand: Resco

System type: Series 5000

Panel description: 13 mm pre-finished compact laminate panel

Panel colour: ~

Aluminium trim: Powder coated, ~

Toilet size: 850 mm width x 1560 mm length

Shower size: 900 mm width x 1875 mm length

• Users of this section shall rely solely on their own professional judgement and skill in determining the appropriateness of using or referring to this section and to satisfy themselves as to the accuracy of the data it contains.
• Users acknowledge that neither Construction Information Limited nor the manufacturer of the products and systems described in the text are in any way liable in respect of any particular use or application of the material provided.

Cleaning and Maintenance of Compact Laminate

Compact laminate is engineered to last for many years. We provide a 10 year guarantee on panel integrity. It is resistant to everyday wear and tear but needs some attention for harsh conditions and staining.

Never use any of the following on Compact Laminate

• Abrasive cleaners such as Jif Cream Cleanser, Ajax (powder or liquid), Chemco, Brasso, Mr. Muscle oven cleaner, Scrub free.
• Neat Janola or other equivalent brands of bleaches.
• Scourer pads, Wire wool or Sandpaper.
• Any strong mineral acid such as sulphuric acid, Battery acid, hydrochloric acid, nitric acid or phosphoric acid.
• Any product containing strong mineral acids such as commercial toilet cleaners, grout removers, descalants, rust removers, etc.
• Care must be taken where cleaning agents or solvents are highly acidic or alkaline as these may permanently damage the surface.

Other Tips:

• In harsh environments (e.g. coastal), the use of CRC or equivalent on hinges and indicator bolts is recommended.
• An occasional re-finish of the exposed edges with an "off the shelf" wood-polish will rejuvenate the original polished seen edges.